How to install fingerprint locks conveniently and quickly?
2023-06-10
A. Information needs to be confirmed before installation B. Lock body and opposite side opening No modification required. If it is a wooden door installation or modification, it is necessary to: 1) Measure the appropriate height of the door handle position from the ground (recommended at around 1.1 meters), and draw a horizontal line as the installation reference line; 2) Draw lines and holes according to the requirements of the hole drawing: It is recommended to first open the hole of the door leaf, and after installing the lock body and panel, draw a line to determine the corresponding position of the door buckle plate on this side of the door frame based on the position of the oblique and square tongues of the lock body, in order to determine the relative position of the door frame and the door buckle plate, so that the lock tongue can enter and exit smoothly; 3) To avoid drilling errors and cracks, it is recommended to drill half of each side of the door during drilling. After opening the door leaf and frame, it is necessary to clean up any foreign objects inside the hole to prevent the door from vibrating and falling into the lock body or locking the latch when it is opened or closed. 
3. Install the lock body. 4. Install the front panel. 5. Install the rear cover plate assembly. 6. Install the rear panel. 7. Install the battery and battery box cover. 8. Install the buckle box and door buckle plate. 9. Functional testing and adjustment.
Mr. ksj